CARBON-STEEL-THREADED-ROD
F1554 Grade 36
Overview
ASTM F1554 grade 36 anchor bolts are manufactured from A36, low carbon steel. This is your standard, run-of-the-mill bolt grade covering anchor bolts in diameters ranging from 1/2″ through 4″. In August of 2007, F1554 grade 36 replaced ASTM A307 grade C which also covered mild steel anchor bolts.
Galvanizing
F1554 grade 36 anchor bolts can be supplied plain black, mechanically galvanized, or hot-dip galvanized.
Welding
F1554 grade 36 anchor bolts are weldable. Common anchor bolt configurations include a rod that is threaded on both ends with a nut and/or anchor plate welded to the embedded end of the anchor bolt. Headed anchor bolts can also have an anchor plate welded to the head of the bolt if the head itself does not provide enough pull-out resistance.
Supplementary Testing
The following supplemental requirements apply to F1554 Grade 36. Supplementary requirements shall apply only when specified in the purchase order or contract.
S2: Instead of the standard color-coding of blue spray paint to indicate Grade 36, supplemental requirement S2 can be specified by the purchaser to require a permanent manufacturer’s identification on the end of the anchor bolt that projects from the concrete.
S3: Instead of the standard color-coding of blue spray paint to indicate Grade 36, supplemental requirement S3 can be specified by the purchaser to have a permanent grade identification on the end of the anchor bolt that projects from the concrete.
Material Substitution
When grade 36 is specified, a weldable grade 55 may be furnished at the supplier’s option.
Mechanical Requirements
| Grade | Identification | Size, Inches | Tensile, ksi | Yield, ksi min | Yield, MPa min | Elong. % min | Reduction of Area %, min |
| 36 |  | 1/2 – 4 | 58 – 80 | 36 | 248 | 23 | 40 |
| 1Color coding (blue) is required while permanent stamping with manufacturer’s identification and grade designation are supplementary requirements. | |||||||
Nuts and Washers
| GRADE | IDENTIFICATION | SIZE, INCHES | RECOMMENDED A563 NUT | WASHER | |||
|---|---|---|---|---|---|---|---|
| PLAIN FINISH | HOT-DIP OR MECHANICAL ZINC COATED | ||||||
| GRADE | STYLE | GRADE | STYLE | ||||
| 36 | | 1/2 – 1-1/2 | A | Hex | A | Hex | F436 |
| 1-5/8 – 4 | A | Heavy Hex | A | Heavy Hex | |||
Buy Astm F1554 Grade 36 Anchor Rod at low cost in Mumbai
Table of Content
- Spec Chart Of Astm F1554 Grade 36 Threaded Rod
- Astm F1554 Grade 36 Bolts Types
- Astm F1554 Grade 36 Bolts Size Chart
- 3/4 Astm F1554 Grade 36 Rod Chemical Analysis
- Astm F1554 Grade 36 Galvanized Bolt Mechanical Strength Table
- Get the Local reference about material quality in your place of Living
Spec Chart Of Astm F1554 Grade 36 Threaded Rod
Check Astm F1554 Grade 36 Threaded Rod price per kg ex Mumbai, Astm F1554 Grade 36 Anchor Bolts and Astm F1554 Grade 36 Nut suppliers in India
| ASTM F1554 Bolt Type | F1554 Anchor Bolt, Carriage Bolt, Flange Bolt, 12 Point Bolt, Hex and Hex Flange Bolts, Hex Head Cap Screw, Place Bolt, Socket Head Cap Screws, Hanger Bolt, Hexagon Bolt / Tap Bolt, Lag Bolt, Machine Bolt, Plow Bolt, Shoulder Bolt, Square Head Bolt, Stud Bolt, T-Head Bolt, Toggle Bolt, U-Bolt |
|---|---|
| Inch | #0000 -3″ (customized sizes available) |
| Metric | M1.6 – M48 |
| Length | Customized Length |
| Grade | Non Ferrous, 12.9, 10.9, 9.8, 8.8, 5.8, 4.6, B7, 2, 5, 8, L9 |
| Material | Brass, Bronze / Copper Base Alloy, Copper, Molybdenum, Steel, Hardened Steel, Stainless Steel, Superalloy (Inconel 718 Bolts, Hastelloy, Monel, Titanium, Exotic Metals, Other |
| Method | Cold forming, Hot Forging, Wire Forming |
| Fastener Standards | ASME / ANSI, BS, DIN, ISO, JIS, SAE, Other |
| Application Industries & uses | Agriculture, Automotive, Construction and Infrastructure, Energy, Transportation |
| Testing Methods | E38, E76 and E354, E53, E54, E62, E75 and E478, E34, E101 and E227, E 120 and E1409. |
| Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Thread Diameters | M6 to M36 |
| Certification | Dual Certified As per ASTM & ASME Codes |
Astm F1554 Grade 36 Bolts Types
Astm F1554 Grade 36 Bolts Size Chart
Check sizes and weight chart of Astm F1554 Grade 36 Threaded Rod
ASTM F1554 ANCHOR BOLTS TYPE | SIZE | GRADE | ASME | ISO | ASTM |
|---|---|---|---|---|---|
Anchor Socket Head Cap Bolts | M1.6 to M64 | 12.9 | B18.3.1 M | 4762 | A574M |
Anchor Socket Low Head Cap Bolts | M4 to M20 | 10.9 | |||
Anchor Socket Head Shoulder Bolts | M6 to M24 | 012.9 | B18.3.3M | ||
Anchor Countersunk Socket Head Bolts | M3 to M20 | 012.9 | B18.3.5M | 10642 | F835M |
Anchor Button Head Socket Bolts | M3 to M12 | 012.9 | B18.3.4M | 7380 | F835M |
Anchor Flange Button Head Socket Bolts | M3 to M10 | 012.9 | F835M | ||
Anchor Knurled Point Socket Set Bolts | M3 to M20 | 45H | B18.3.6M | 4029 | F912M |
Anchor Flat Point Socket Set Bolts | M6 to M12 | 45H | B18.3.6M | 4026 | F912M |
Anchor Dog Point Socket Set Bolts | M3 to M20 | 45H | B18.3.6M | 4028 | F912M |
Anchor Cone Point Socket Set Bolts | M3 to M12 | 45H | B18.3.6M | 4027 | F912M |
Anchor Plain Point Socket Set Bolts | M3 to M20 | 45H | B18.3.6M | 4029 | F912M |
Anchor Taper Pressure Plug | M8 to M22 | – |
SIZE | PROPERTY CLASS | STANDARD |
|---|---|---|
M6 to M42 | 10 | ISO 4032 |
M6 to M20 (Gr.8) M10 to M24 (Gr.10) | 8 & `10 | DIN 982 |
M6 to M20 (Gr.8) M10 to M24 (Gr.10) | 8 & 10 | DIN 985 |
M6 to M12 | 8 | DIN 929 |
SIZE | HARDNESS | STANDARD |
|---|---|---|
3mm to 39mm | HV (430 to 530) | DIN 7980 |
3mm to 39mm | HV (430 to 530) | DIN 127 B |
12mm to 30mm | HV (300 to 370) | IS 2016 |
12mm to 56mm | Rockwell 26 to 45 (HDG) Rockwell 38 to 45 (Coated) | ASTM F436M |
3/4 Astm F1554 Grade 36 Rod Chemical Analysis
Stockist of Astm F1554 Grade 36 Class 1a Bolt and Astm F1554 Grade 36 Headed Anchor Bolts Test Certificate
| Element | Grade 36 | Grades 55 and 105 | ||
| Sizes up to 3/4 | Sizes over 3/4 to 1-1/2 | Sizes over 1-1/2 to 4 | ||
| Carbon (max) | 0.26% | 0.27% | 0.28% | |
| Manganese | * | 0.60 – 0.90% | 0.60 – 0.90% | |
| Phosphorus, max | 0.04% | 0.04% | 0.04% | 0.040% |
| Sulfur, max | 0.05% | 0.05% | 0.05% | 0.050% |
| Copper, min (when specified) | 0.20% | 0.20% | 0.20% | 0.20% |
Astm F1554 Grade 36 Galvanized Bolt Mechanical Strength Table
| Grade | Size inches | Tensile, ksi | Yield, ksi min | Yield, MPa min | Elong. % min | RA % min |
| 36 | 1⁄2 – 4 | 58 – 80 | 36 | 248 | 23 | 40 |
| 55 | 1⁄2 – 2 | 75 – 95 | 55 | 380 | 21 | 30 |
| 21⁄4 – 21⁄2 | 75 – 95 | 55 | 380 | 21 | 22 | |
| 23⁄4 – 3 | 75 – 95 | 55 | 380 | 21 | 20 | |
| 31⁄4 – 4 | 75 – 95 | 55 | 380 | 21 | 18 | |
| 105 | 1⁄2 – 3 | 125 – 150 | 105 | 724 | 15 | 45 |
Get the Local reference about material quality in your place of Living
| Indonesia, Philippines, Dammam -KSA, Belgium | F1554 Grade 36 Threaded Rod |
| France, Europe, Qatar, Thailand | F1554 Grade 36 Galvanized |
| Germany, Thailand, Czechia, Malaysia | F1554 Grade 36 Anchor Bolts |
| USA, Bangladesh, Malaysia, Finland | F1554 Grade 36 Anchor Rod |
| Saudi Arabia (KSA), Kuwait, South Africa, Brazil | F1554 Grade 36 Headed Anchor Bolts |
| South Africa, Singapore, Bahrain, Singapore | F1554 Grade 36 Bolts |
| Australia, UK, Philippines, Nigeria | F1554 Grade 36 Class 1a |
| Malaysia, Hong Kong, Oman, UAE | F1554 Grade 36 Class 2a |
| Italy, Iran, Chile, Singapore | F1554 Grade 36 Nut |
| Turkey, Norway, United Arab Emirates (UAE), Malaysia | 3/4 F1554 Grade 36 Rod |
Get in Touch
- RP Industrial Estate, 38-A, Focal Point Extension, Dhandari khurd, Ludhiana. (Punjab, India.)
- +91-92162-02063
- ksharma302@gmail.com
- info@triveshsteel.in
Our Mission
At TRIVESH STEEL AND INFRASTRUCTURE SYSTEM, our mission is to be the trusted cornerstone of steel manufacturing, empowering our nation’s infrastructure and economy through excellence in steel production.
Our Commitment to Prosperity:
We are committed to producing top-tier steel products that fortify our nation’s infrastructure, energize local economies, and drive domestic progress. Our relentless dedication to quality and sustainability ensures that our steel remains the backbone of our nation’s growth.
Our Gallery
